Request a Quote

Quote for Dual Comb Noise Emitter YRS03

* indicates a required field

Your details

Quoting for:

York Reference Source Kits:

All York Reference Source kits consist of:

  • YRS01/YRS02/YRS03 noise/comb reference source with selectable broadband noise and comb output up to 6 GHz
  • Standard test results, dependent on the type of source
  • Manual
  • Hard case

Request a quotation for:

YRS03KIT01 including:
  • YRS03 30 MHz to 1 GHz noise/comb reference source
  • MCN03 monocone antenna (1 GHz to 6 GHz optimum with YRS03)
  • CAL19 Conducted output power test results, 30 MHz to 6 GHz, measured using a spectrum analyser, all noise and comb modes
  • Alkaline batteries
A YRS03KIT02 including:
  • YRS03 30 MHz to 1 GHz noise/comb reference source
  • TLM02 monopole antenna (30 MHz to 300 MHz optimum)
  • MON03 200 MHz to 1 GHz (optimum) 270 mm long monopole antenna
  • MCN03 monocone antenna (1 GHz to 6 GHz optimum with YRS03)
  • LSA03 LISN adaptor with IEC 320 style connector
  • CAL19 Conducted output power test results, 30 MHz to 6 GHz, measured using a spectrum analyser, all noise and comb modes
  • Alkaline batteries
YRS03 Accessories:
TLM01: 100 mm top-loaded monopole antenna (200 MHz to 1 GHz optimum)
TLM02: 270 mm top-loaded monopole antenna (30 MHz to 300 MHz optimum)
MON03: 270 mm monopole antenna (200 MHz to 1 GHz optimum)
MCN03: Monocone antenna (1 GHz to 6 GHz optimum with YRS03 only)
NIA01: ISN adaptor with two data socket outputs (6 way RJ11/RJ14/RJ25 socket & 8 way RJ45 socket)
YRS Combination Kit:
YRS combination kit including:
  • YRS02 comb/noise reference source (9 KHz to 1 GHz)
  • YRS03 comb/noise reference source (30 MHz to 6 GHz)
  • TLM02 270mm long top-loaded monopole antenna (30 MHz to 300 MHz optimum)
  • MON03 270mm long monopole antenna (200 MHz to 1 GHz optimum)
  • MCN03 monocone antenna (1 GHz to 6 GHz optimum)
  • LSA03 LISN adapter with IEC style connector
  • CAL16 Conducted output power test results, 9 kHz to 1 GHz, measured using a spectrum analyser, noise and comb modes (YRS02)
  • CAL19 Conducted output power test results, 30 MHz to 6 GHz, measured using a spectrum analyser, all noise and comb modes (YRS03)
YRS03 Output Measurements:
CAL18 Radiated field strength test results, 30 MHz to 1 GHz, measured at 3 m in a FAR using a spectrum analyser or receiver, all noise and comb modes
CAL19 Conducted output power test results, 30 MHz to 6 GHz, measured using a spectrum analyser, noise and comb modes
CAL21 Radiated field strength test results, 1 GHz to 6 GHz, measured at 3 m in a FAR using a spectrum analyser, noise, 20 MHz and 40 MHz comb modes

Data Protection Act

Eurofins York Ltd may from time to time write to you with information about its products or services, and in order to do so will store the information you give us in either paper or electronic format. Should you NOT wish to receive correspondence from us please tick here

Thank you for your interest in our products.

You may wish to read our privacy and cookies statement.