Introducing the new CGE 05 & CGE 06 Comb Generator Emitters

The new CGE 05 and CGE 06 reference comb emitter generators from Eurofins York are the next generation of precision noise sources, ideal for reference measurements and checks in wide range of applications.

Replacing the industry-leading CGE 02 and CGE 03 comb generator emitters, the new CGE 05 and CGE 06 are the first members of a new generation of reference sources from

Designed to be compact yet feature-rich, both the CGE 05 and CGE 06 are housed in a purpose-designed enclosure that provides the maximum shielding whilst allowing the generators to be used either on their own with an external power supply or with the PPU01 rechargeable battery pack.

Featuring two user selectable frequency steps, 434 MHz or 0.5 GHz for the CGE 05 and 915 MHz or 1GHz for the CGE 06, the units are ideal for use as reference sources for a wide range applications including:

  • Conducted and radiated measurement systems validation and verification
  • Investigation and characterisation of different measurement environments such as fully- or semi-anechoic chambers
  • Reference source for:-
    • Daily pre-test checks as required by accreditation authorities e.g. ISO 17025, DEFSTAN 59-411
    • Comparisons between test sites
    • Long-term performance monitoring
    • Investigation of screened room behaviour
    • Cable loss measurements
  • Evaluating component assembly characteristics e.g. filter loss, amplifier gain and bandwidth
  • Spectrum analyser or receiver pre-checks
  • Shielding evaluation

A comparison between the CGE 05 & CGE 06

   CGE 05  CGE 06
Frequency Range

Conducted 434 GHz to 26 GHz direct connection into 50Ω system

Radiated 1 GHz to 26 GHz radiated using MCN02 monocone antenna

Conducted 915 MHz to 40 GHz direct connection into 50Ω system

Radiated 1 GHz to 26 GHz radiated using MCN02 monocone antenna

Output level Conducted 60 dBµV min. into 50 Ω system for 90% of combs up to 26 GHz Conducted 60 dBµV min. into 50 Ω system for 90% of combs up to 40 GHz
Comb signal step size Comb Mode 1 – 434 MHz base frequency 434 MHz, 868 MHz, … 25.606 GHz
Comb Mode 2 – 0.5 GHz base frequency 0.5 GHz, 1 GHz, … 26 GHz
Comb Mode 1 – 915 MHz base frequency (915 MHz, 1.83 GHz … 39.345 GHz)
Comb Mode 2 – 1 GHz base frequency 1 GHz, 2 GHz, … 40 GHz
Operating Time Battery-powered
10 hours typical with fully charged PPU01
Battery-powered
6.5 hours typical with fully charged PPU01
Output Connector 50 Ω precision SMA jack 2.92 mm jack
Dimensions CGE05 56 mm x 17.5 mm x 65 mm (72 mm including connector)
With PPU01 80 mm diameter x 65 mm (72 mm including connector)
CGE06 56 mm x 17.5 mm x 65 mm (72 mm including connector)
With PPU01 80 mm diameter x 65 mm (72 mm including connector)
Weight 0.1kg
0.65kg with PPU01
0.1kg
0.65kg with PPU01 
Power Supply 9 – 18 Vdc, 0.5 A max 9 – 18 Vdc, 0.5 A max